Double Wall Terra-Cotta Cladding with Thermax Continuous Insulation & Metal Stud Backup









 Interior Finish (vapor permeable)--
 Interior Gypsum Board (Type X) -
 Metal Stud (18 GA. Min. @16” O.C.)- -
 Stud Cavity Insulation (Optional)Dow2" Styrofoam SPF CM-2045
 Exterior Gypsum Sheathing* - -
 Self Adhered Air/Water/Vapor Barrier**Carlisle705 FR-A
 Continuous Insulation**Dow2" Thermax Sheathing
 Cladding Attachment System**Knight WallCI System
 Double Wall Terra-Cotta Cladding**TerrealNAPiterak Slim 30

* For a 1 hour fire rating change Exterior Gypsum Sheathing to Fire Rated Exterior Gypsum Sheathing.

** Product recommendations are based on Type I-IV construction requiring NFPA 285 assembly acceptance criteria compliance per IBC Sections 1403.5 & 2603.5.

Assembly Performance:

(proposed clear wall U-Factors are approximately 2% | 25% better than code and have 91% | 80% thermal effectiveness)

 Clear Wall 

Code Minimum
(IECC 2015 - Metal Framed)


Design R-Value: aR-13 + R-7.5ciR-13ci  |  R-12.8 + R-13ci
Total R-Value:N/AR-17.47  |  R-30.27
Effective R-Value:cN/AR-15.95 |  R-24.27
Design U-Factor: a, bU-0.064U-0.063  |  U-0.048
Effective U-Factor: cN/AU-0.063  |  U-0.041
Assembly Air Permeability0.04 cfm/ft2 @75Pa0.0014 cfm/ft2 @75Pa

Clear wall meets energy code thermal requirements without stud cavity insulation.

b Clear wall U-Factor is based on the stud size & spacing noted above and is calculated per IECC 2015 & ASHRAE 90.1-2013 Appendix A.

Clear wall effective thermal performance is based on the stud size & spacing noted above, manufacturer literature and industry studies on the thermal performance of facades.


Click here to download a complete copy of this opaque wall Basis of Design package